Jnicon M23 2+1+5 Pin 50A Push‑Lock Right Angle Connector – IP67 Waterproof, Anti‑Spark, High Current 9AWG Yellow Cable Assembly for E‑Bike E‑Scooter Motorcycle Battery Charging

Jnicon M23 50A Push‑Lock Right Angle Connector – A High‑Current Power & Signal Hybrid Solution Designed for New Energy Vehicles and Energy Storage Systems.

The Jnicon M23 2+1+5‑pin right‑angle connector is a high‑performance hybrid connector that combines power delivery and signal transmission. It is specifically engineered for electric two‑wheelers, electric motorcycles, energy storage devices, and lithium‑battery charging systems. The 8‑pin configuration consists of **2 high‑current power pins, 1 middle pin, and 5 signal pins**, supporting up to **50A** current and simultaneous multi‑channel signal communication.

This assembly comes with a **9AWG yellow‑jacketed cable** (700mm on the socket side + 250mm on the wire side) and features a **push‑lock (Push‑Lock) self‑locking mechanism** for quick mating and secure connection.

Key Features

• 🔌 2+1+5 Pin Hybrid Configuration

- **2 power pins** – carry up to 50A for main power supply  
- **1 middle pin** – used for grounding or auxiliary power  
- **5 signal pins** – for BMS communication, temperature sensing, and control signals  
- The 8‑pin design enables **simultaneous power and data transmission**, meeting the intelligent management needs of lithium batteries.

• 💧 IP67 Waterproof & Dustproof

- Total protection against dust; withstands **immersion in 1 metre of water for 30 minutes**  
- Equipped with a silicone/rubber sealing ring  
- Suitable for outdoor rainy conditions, humid environments, and harsh working sites.

• 🛡️ Anti‑Spark Design

- Built‑in pre‑charge resistor circuit that suppresses inrush current during mating/unmating  
- **Prevents sparking** during connection and disconnection, protecting both the connector contacts and the electronic equipment  
- Extends service life and enhances **safety during outdoor charging**.

• ⚡ High Current Capacity

- Rated current: **50A** (power pins)  
- Rated voltage: **300V + 60V**  
- Supports fast charging for high‑power EV batteries.

• 🔒 Push‑Lock Self‑Locking Mechanism

- **Quick connect/disconnect** – one‑hand operation, no rotation needed  
- **Audible click** confirms proper locking  
- Anti‑slip housing design, **vibration‑proof and secure**.

• 🧵 9AWG Yellow Jacketed Cable

- **9AWG (approx. 6.6 mm²)** – heavy‑gauge wire for high current with low heat generation  
- **High‑visibility yellow jacket** for easy identification and safety maintenance  
- Operating temperature range: **‑40°C ~ 105°C**.

• 🔥 UL94‑V0 Flame Retardant

- Housing made of **PA66 nylon / thermoplastic**, rated UL94‑V0  
- No dripping and non‑flammable under high temperatures, ensuring **charging safety**.

• 🏅 International Approvals

- Certified to **UL, TUV, CE, RoHS, CCC** standards.

Technical Specifications

Applications

🚲 New Energy Electric Vehicles
- Electric two‑wheelers / electric tricycles  
- Electric motorcycles (E‑Motorcycle)  
- Electric scooters (E‑Scooter)  
- Shared e‑bikes

🔋 Energy Storage & Battery Equipment
- Lithium‑battery charging / discharging interfaces  
- Energy storage power systems  
- Battery swap cabinet connectors  
- Portable power stations / emergency power supplies

🏭 Industrial & Professional Equipment
- Industrial automation equipment  
- Stage lighting / power amplifiers & speakers  
- LED lighting  
- 5G communication base stations

☀️ Renewable Energy Systems
- Solar inverters  
- Photovoltaic enclosures

Installation Guide

1. **Strip the cable** – remove about 20–23 mm of the outer jacket from the 9AWG cable.  
2. **Solder or crimp** – attach the wire cores to the corresponding contacts.  
3. **Insert into housing** – place the contacts into the connector shell according to the 2+1+5 pin arrangement.  
4. **Push to lock** – push the plug into the mating receptacle until you **hear a “click”** – that confirms proper locking.  
5. **Check** – gently tug the cable to ensure a secure connection.

Why Choose Jnicon?

- **50+ patents** – including invention, utility model, and design patents  
- **International certifications** – UL, TUV, CCC, CE, RoHS  
- **10+ years of experience** – founded in 2013, specialised in waterproof connector R&D and manufacturing  
- **OEM / ODM support** – custom design, tooling development, and tailored solutions  
- **Global export** – products sold to the USA, Europe, Southeast Asia, and beyond.

Packaging & Shipping

- **Packaging** – PE bag / carton  
- **Lead time** – 7–30 working days after receipt of deposit  
- **Customisation** – logo printing, colour options, cable length adjustment available upon request.

⚠️ Important Notice

> This product is a high‑current power connector. Installation and use should be carried out by qualified electrical technicians. Please verify that the voltage and current ratings match your equipment before use, and ensure the connection is secure to avoid poor contact that may cause overheating.